Vessels & Vehicles.
Our broad range of Vehicles and Vessels allow us to always be prepared for any project that comes our way.
Performing Tasks Safely & Simply.
Torden
The design of our custom-built vessel ‘Torden’ is based on vast Royal Australian Navy experience and Civil Marine operations.
Torden provides a multi-use platform allowing difficult tasks to be performed safely and simply. The large open work areas, dry storage, lifting hardware, auxiliary generators and battery banks offer versatility of operation.
The overall length of 7.5m with an open deck.
3.3m beam allows wide loads and a large work area.
An extremely low draft of 0.3m allows access to very shallow areas and a low air draft of 2.4m for overhead access.
Maximum speed of 32 knots (60 km/h) when fully loaded.
A specially designed hull for maximum stability.
Powered by Twin Mercury ‘SeaPro’ 150 HP engines featuring an oversized gearbox and propellers to enable greater torque and thrust for pushing or towing.
The bow ‘push knees’ enable Torden to easily command and control whilst pushing barges or other vessels and assist when docking or lifting loads from wharves or piers.
Stern Sampson Post for heavy tows and salvages.
2C Survey for offshore operations to 5 nautical miles from the coast.
An integrated surface supply dive spread for commercial diving, maintaining room for other equipment, materials and workspace.
Torden’s console houses a GPS system, 12 Volt charging ports, VHF and UHF radio and desk area to allow users a sheltered area to conduct data collection or planning.
Capstan Vertical Winch allows loads of up to 400 kg to be recovered from the seabed to the surface.
Fassi ‘Micro 15A’ Crane enables loads to be deployed or recovered from the water.
Anvil
Overall length: 5.1m.
2.3m beam.
A specially designed foredeck with ‘moonpool’ or ‘trapdoor’ for various applications.
Powered by Yamaha 25 HP engine.
The bow ‘push knees’ enable Anvil to push other barges or to operate against structures.
2D Survey for inshore operations.
Dive Trailer
Operating in exposed environmental conditions, we tackle inherently demanding tasks. With a tailor-made enclosed trailer designed to accommodate a 100m surface supply diving system, we ensure that every tool and piece of gear is readily accessible on-site. This setup offers the added advantage of providing shelter to our support crew during inclement weather. Moreover, our clients on-site can remain comfortable, dry and warm, with the option of enjoying a hot beverage as they oversee projects via the diver-mounted video system.
ISUZU NQR 7-SEATER CREW CAB
Our Isuzu NQR Crew Cab is the workhorse of the Aegir Divers fleet. Designed to transport the entire crew and equipment in a single vehicle, it streamlines mobilisation while reducing fuel use and environmental impact.
Its generous payload capacity expands the range of equipment and services we can deploy to site, and the adaptable tray configuration allows for crane installation to support lifting, salvage and marine operations.
Efficient, versatile and ready for the demands of commercial diving, the NQR helps us get more people, more equipment and more capability to where it's needed.
